HIPS (High Impact Polystyrene) Injection Molding Supplier & Manufacturer

HIPS (High Impact Polystyrene) is an impact-modified grade of polystyrene designed to deliver higher toughness, better drop resistance, and good dimensional stability while maintaining excellent processability and cost efficiency. It is widely used for appliance housings, consumer electronics covers, displays, and point-of-sale parts. We offer OEM/ODM HIPS injection molding from DFM and tooling to mass production and finishing.

Key Properties of HIPS for Injection Molding

Impact Resistance

Rubber modification gives HIPS much higher impact strength than GPPS. Suitable for parts that may be dropped, flexed, or assembled with snap-fits.

Dimensional Stability

Good stiffness and low warpage for medium-precision housings, bezels, brackets, and interior panels.

Surface Finish

Accepts textures, matte or gloss finishes, and printing/metallizing. Ideal for visible consumer-facing surfaces.

Cost Efficiency

Lower cost than many engineering plastics (ABS, PC/ABS) while still offering acceptable toughness for non-structural parts.

Applications of HIPS Injection Molding

  • 📺 Appliances & Electronics: TV back covers, set-top boxes, printer housings, small appliance shells
  • 🏪 Retail / Point of Sale: Display fixtures, price holders, signage frames, cosmetic stands
  • 🧴 Personal Care & Consumer: Razor housings, device covers, handheld accessories
  • 🧪 Medical / Labware (grade-specific): Trays, cassettes, cartridge shells, covers*
  • 📦 Packaging Components: Cosmetic inserts, custom in-box holders, protective display shells

*Medical usage depends on resin compliance and sterilization requirements.

HIPS Injection Molding Process & Considerations

  1. Material Behavior: HIPS is PS modified with rubber domains. This increases impact resistance and drop toughness versus GPPS (general purpose PS).
  2. Drying: HIPS is generally non-hygroscopic and typically does not require drying. Pellets should be kept free of surface moisture/contamination.
  3. Melt & Mold Temps: Typical melt ~190–240 °C; mold ~20–60 °C. We fine-tune settings based on wall thickness, cosmetic targets, and cycle time.
  4. Shrinkage: About ~0.5–0.8%, similar to other polystyrene systems. This supports good dimensional consistency for covers and bezels.
  5. Flow & Gating: Flows well, supports multi-cavity/high-speed molding. Gate design and venting must prevent burn marks and visible knit lines on the “A-side.”
  6. Structural Limits: HIPS is tougher than GPPS but still not an ABS or PC in terms of high-load structural strength. Avoid using it as a primary load-bearing or high-temperature structural part.
  7. Surface & Decoration: Takes paint, pad print, hot stamp, laser marking, and vacuum metallization. Widely used where branding/appearance matters.
  8. Flame Performance: Base HIPS is not flame retardant. FR-rated grades are available for electronics and appliance markets that require UL 94 ratings.

Advantages of HIPS in Injection Molding

  • ✔ Higher impact resistance vs. standard PS (GPPS)
  • ✔ Good stiffness and dimensional control for housings and panels
  • ✔ Easy to process with short cycle times and multi-cavity tools
  • ✔ Clean surface finish, suitable for matte or textured cosmetic parts
  • ✔ Compatible with painting, printing, and metallization for branded appearance
  • ✔ Cost-effective alternative to ABS in non-critical structural applications

Why Choose Our Factory for HIPS Injection Molding

🏭 High-Volume Capability: Multi-cavity molds, automation, and fast cycles for consumer/electronic housings
🎨 Cosmetic Surface Control: Gloss, satin, leather texture, embossed logo, and paint-ready surfaces
✅ Quality System: ISO-based QA, RoHS/REACH compliance, cosmetic inspection for weld lines and sink marks
⚡ Material Range: Standard HIPS, high-impact grades, UV-stable grades, FR-rated HIPS for appliances and electronics

FAQs About HIPS Injection Molding

1. HIPS vs. GPPS — what’s the difference?

GPPS (general purpose polystyrene) is stiffer and clearer but brittle. HIPS is modified with rubber, so it’s tougher, less brittle, and usually opaque. HIPS is preferred for housings and covers that need durability.

2. Can HIPS replace ABS?

For many cosmetic housings with moderate mechanical requirements, yes. HIPS is cheaper and easier to process. But ABS still wins in higher strength, higher heat resistance, and better structural performance.

3. Is HIPS suitable for outdoor applications?

Standard HIPS is not very UV-stable. For outdoor or sunlight-exposed parts we normally recommend ASA, UV-stabilized ABS, or PMMA, unless you specify a UV-modified HIPS grade.

4. Is flame-retardant HIPS available?

Yes. FR HIPS grades exist for appliance and electronics applications that require UL 94 ratings. We can source and certify per your compliance needs.

5. Can you deliver painted or logo-finished HIPS parts?

Yes. We support in-mold texture, pad printing, silk screen, hot stamping, vacuum metallization, color matching, and logo emboss in the tool steel.

TYPE TO SEARCH

Tel:+86 0752-3336216
Email:Sales@shinzoft.com